nasbeery/nasbeery2

#!/bin/bash
prog="$(basename "$0")"

usage() {
	cat >&2 <<-EOF
	usage: $prog [-h] [-U USERNAME] [-P PASSWORD] [-H HOSTNAME] [-D DOMAIN] [-Z POOL] [-S SHARE] [-A ADDONS] [-F]
	  installs nasbeery onto your raspberry pi os
    -U USERNAME  Username for SSH, Cockpit and SMB Login (default: pi)
    -P PASSWORD  Password for SSH, Cockpit and SMB Login (min. 8 chars, default: password prompt)
    -H HOSTNAME  Hostname of this nasbeery (default: nasbeery)
    -D DOMAIN    Domain name of this nasbeery (default: bashclub.lan)
    -Z POOL      Name of the zpool to create (default: tank)
    -S SHARE     Name of the SMB share to create (default: share)
    -A ADDONS    Comma separated list of addons to install (ispconfig, docker)
    -F           Enforce formatting disks - WARNING: Destroys all existing data
  ---------------------------------------------------------------------------
    (C) 2022     nasbeery installer by bashclub (https://github.com/bashclub)
  ---------------------------------------------------------------------------
	EOF
	exit $1
}

USERNAME=pi
HOSTNAME=nasbeery
DOMAIN=bashclub.lan
FORMAT=0
ADDONS=
ZPOOL=tank
SHARE=share

while getopts "hU:P:H:D:FIZ:S:" opt; do
  case $opt in
    h) usage 0 ;;
    U) USERNAME=$OPTARG ;;
    P) PASSWORD=$OPTARG PASSWORD_REPEAT=$OPTARG ;;
    H) HOSTNAME=$OPTARG ;;
    D) DOMAIN=$OPTARG ;;
    F) FORMAT=1 ;;
    A) ADDONS=$OPTARG ;;
    Z) ZPOOL=$OPTARG ;;
    S) SHARE=$OPTARG ;;
    *) usage 1 ;;
  esac
done
shift $((OPTIND-1))

if [[ $(ls nasbeery.conf) ]]; then
  source nasbeery.conf
  PASSWORD_REPEAT=$PASSWORD
else
  cat << EOF > nasbeery.conf
USERNAME=$USERNAME
PASSWORD='$PASSWORD'
HOSTNAME=$HOSTNAME
DOMAIN=$DOMAIN
FORMAT=$FORMAT
ADDONS=$ADDONS
ZPOOL=$ZPOOL
SHARE=$SHARE
EOF
fi

# Change password for Samba and Terminal
while [[ "$PASSWORD" != "$PASSWORD_REPEAT" || ${#PASSWORD} -lt 8 ]]; do
  PASSWORD=$(whiptail --backtitle "NASBEERY SETUP" --title "Set password!" --passwordbox "${PASSWORD_invalid_message}Please set a password for Terminal, Samba and Backupwireless\n(At least 8 characters!):" 10 75 3>&1 1>&2 2>&3)
  PASSWORD_REPEAT=$(whiptail --backtitle "NASBEERY SETUP" --title "Set password!" --passwordbox "Please repeat the Password:" 10 70 3>&1 1>&2 2>&3)
  PASSWORD_invalid_message="ERROR: Password is too short, or not matching! \n\n"
done

# check current zfs state
if [[ $(lsmod | grep -E ^zfs) ]] && [[ $FORMAT -eq 0 ]]; then
    # module is loaded
    whiptail --title "Possible data loss!" \
    --backtitle "NASBEERY SETUP" \
    --yes-button "PRESERVE DATA" \
    --no-button  "FORMAT DISKS!" \
    --yesno "Would you like to preserve you existing ZFS data from a previous installation?" 10 75
    FORMAT=$?
fi

# add extra apt keys
echo "Add wsdd apt repo key"
sudo apt-key adv --fetch-keys https://pkg.ltec.ch/public/conf/ltec-ag.gpg.key > /dev/null 2&>1

# add extra apt repos
echo "Add wsdd apt repo url"
echo "deb https://pkg.ltec.ch/public/ $(lsb_release -cs) main" | sudo tee -i /etc/apt/sources.list.d/wsdd.list

echo "Add debian bullseye backports repo"
echo "deb http://ftp.de.debian.org/debian/ bullseye-backports main contrib non-free" | sudo tee -i /etc/apt/sources.list.d/bulleye-backports.list

# pin cockpit to buster backports
echo "Configure apt to install cockpit from backports repo"
cat << EOF | sudo tee -i /etc/apt/preferences.d/99-cockpit
Package: cockpit cockpit-*
Pin: release a=bullseye-backports
Pin-Priority: 900
EOF

# update system and install packages
echo "Updating package lists"
sudo apt -qq update
echo "Installing dist-upgrade"
DEBIAN_FRONTEND=noninteractive DEBIAN_PRIORITY=critical sudo apt -y -qq -o DPkg::options::="--force-confdef" -o DPkg::options::="--force-confold" dist-upgrade > /dev/null 2&>1
echo "Detecting Architecture"
if [[ $(dpkg --get-selections | grep -m1 "raspberrypi-kernel") ]]; then
	headers="raspberrypi-kernel-headers"
elif [[ $(dpkg --get-selections | grep -m1 "linux-image-amd64") ]]; then
	headers="linux-headers-amd64"
fi
echo "Intalling required packages"
DEBIAN_FRONTEND=noninteractive DEBIAN_PRIORITY=critical sudo apt -y -qq -o DPkg::options::="--force-confdef" -o DPkg::options::="--force-confold" install $headers acl samba-dsdb-modules samba-vfs-modules samba wsdd ntpdate git apt-transport-https gnupg2 software-properties-common vim htop zfs-dkms zfsutils-linux zfs-auto-snapshot wsdd net-tools dnsutils > /dev/null 2&>1
echo "Installing cockpit"
DEBIAN_FRONTEND=noninteractive DEBIAN_PRIORITY=critical sudo apt -y -qq -o DPkg::options::="--force-confdef" -o DPkg::options::="--force-confold" install --no-install-recommends cockpit > /dev/null 2&>1

echo "Activate zfs module"
sudo modprobe zfs

echo "Update time via ntp"
sudo ntpdate-debian -b > /dev/null

case $FORMAT in
   0) echo "Your ZFS Data will be preserved";;
   1) echo "Existing data on the drives will be deleted..."
        sudo zpool destroy $ZPOOL
        sudo zpool create -f -o autoexpand=on -o ashift=12 $ZPOOL mirror sda sdb
        echo "Regenerate ssh host keys"
        sudo rm -f /etc/ssh/ssh_host_*
        sudo ssh-keygen -t rsa -b 4096 -f /etc/ssh/ssh_host_rsa_key -N ""
        sudo ssh-keygen -t ed25519 -f /etc/ssh/ssh_host_ed25519_key -N ""
        ;;
   255) echo "[ESC] key pressed >> EXIT" &&  exit;;
esac

echo "Hadening ssh service"
echo "Enable the RSA and ED25519 keys"
sudo sed -i 's/^\#HostKey \/etc\/ssh\/ssh_host_\(rsa\|ed25519\)_key$/HostKey \/etc\/ssh\/ssh_host_\1_key/g' /etc/ssh/sshd_config
echo "Remove small Diffie-Hellman moduli"
awk '$5 >= 3071' /etc/ssh/moduli | sudo tee -i /etc/ssh/moduli.safe
sudo mv -f /etc/ssh/moduli.safe /etc/ssh/moduli
echo "Restrict supported key exchange, cipher, and MAC algorithms"
echo -e "\n# Restrict key exchange, cipher, and MAC algorithms, as per sshaudit.com\n# hardening guide.\nKexAlgorithms curve25519-sha256,curve25519-sha256@libssh.org,diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,diffie-hellman-group-exchange-sha256\nCiphers chacha20-poly1305@openssh.com,aes256-gcm@openssh.com,aes128-gcm@openssh.com,aes256-ctr,aes192-ctr,aes128-ctr\nMACs hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,umac-128-etm@openssh.com\nHostKeyAlgorithms ssh-ed25519,ssh-ed25519-cert-v01@openssh.com,sk-ssh-ed25519@openssh.com,sk-ssh-ed25519-cert-v01@openssh.com,rsa-sha2-256,rsa-sha2-512,rsa-sha2-256-cert-v01@openssh.com,rsa-sha2-512-cert-v01@openssh.com" | sudo tee -i /etc/ssh/sshd_config.d/ssh-audit_hardening.conf

if [[ $(zfs list $ZPOOL/$SHARE > /dev/null 2&>1) -gt 0 ]] ; then
	echo "Creating $ZPOOL/$SHARE"
	sudo zfs create -o compression=lz4 $ZPOOL/$SHARE
fi
echo "Settings permissions on $ZPOOL/$SHARE"
sudo chmod -R 770 /$ZPOOL
sudo chown -R $USERNAME:root /$ZPOOL

echo "Seting hostname and fqdn"
echo "$HOSTNAME" | sudo tee -i /etc/hostname
cat << EOF | sudo tee -i /etc/hosts
# Host addresses
127.0.0.1  localhost
127.0.1.1  $HOSTNAME.$DOMAIN $HOSTNAME
::1        localhost ip6-localhost ip6-loopback
ff02::1    ip6-allnodes
ff02::2    ip6-allrouters
EOF

echo "Configuring user"
sudo useradd $USERNAME
echo "$USERNAME:$PASSWORD" | sudo chpasswd
sudo smbpasswd -x $USERNAME
(echo $PASSWORD; echo $PASSWORD) | sudo smbpasswd -a $USERNAME

echo "Install or update cockpit zfs manager"
if [[ $(ls /usr/src/cockpit-zfs-manager) ]] ; then
	cd /usr/src/cockpit-zfs-manager
	sudo git config pull.rebase true
	sudo git pull
else
	sudo git clone https://github.com/45drives/cockpit-zfs-manager.git /usr/src/cockpit-zfs-manager
fi
sudo cp -r /usr/src/cockpit-zfs-manager/zfs /usr/share/cockpit

sudo mkdir -p /etc/cockpit/zfs/shares
sudo mkdir -p /etc/cockpit/zfs/snapshots

echo "Writing cockpit configuration"
cat << EOF | sudo tee -i /etc/cockpit/zfs/config.json
{
  "#1": "COCKPIT ZFS MANAGER",
  "#2": "WARNING: DO NOT EDIT, AUTO-GENERATED CONFIGURATION",
  "cockpit": {
    "manage": true
  },
  "disks": {
    "base2": false
  },
  "loglevel": "2",
  "samba": {
    "manage": true,
    "windowscompatibility": true
  },
  "updates": {
    "check": true
  },
  "zfs": {
    "filesystem": {
      "cloneorigin": false,
      "quotarestrict": true,
      "readonlylockdown": false,
      "snapshotactions": true
    },
    "snapshot": {
      "filesystemlist": true
    },
    "status": {
      "errorcolors": true,
      "trimunsupported": false
    },
    "storagepool": {
      "activetab": 1,
      "boot": true,
      "bootlockdown": true,
      "count": true,
      "refreshall": false,
      "root": true
    }
  }
}
EOF

if [[ $(ls /etc/cockpit/zfs/shares.conf) ]]; then
	echo "Creating cockpit zfs shares conf"
	cat << EOF | sudo tee -i /etc/cockpit/zfs/shares.conf
# COCKPIT ZFS MANAGER
# WARNING: DO NOT EDIT, AUTO-GENERATED CONFIGURATION
EOF
fi

echo "Configure zfs-auto-snapshot: change retention from 24 to 48h and 12 to 3 months"
sudo sed -i 's/24/48/g' /etc/cron.hourly/zfs-auto-snapshot
sudo sed -i 's/12/3/g' /etc/cron.monthly/zfs-auto-snapshot

echo "Configure RAID led"
echo -e 'PATH="/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin"\n*/1 * * * * root echo 14 > /sys/class/gpio/export 2> /dev/null;echo out > /sys/class/gpio/gpio14/direction ; zpool import -fa -d /dev/ > /dev/null; zpool list| grep -q ONLINE; echo \$? > /sys/class/gpio/gpio14/value' | sudo tee -i /etc/cron.d/raidled

echo "Write samba server configuration"
cat << EOF | sudo tee -i /etc/samba/smb.conf
[global]
    workgroup = WORKGROUP
    log file = /var/log/samba/log.%m
    max log size = 1000
    logging = file
    panic action = /usr/share/samba/panic-action %d

    server role = standalone server
    obey pam restrictions = yes
    unix password sync = yes
    passwd program = /usr/bin/passwd %u
    passwd chat = *Enter\snew\s*\password:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
    pam password change = yes
    map to guest = bad user

    vfs objects = shadow_copy2
    shadow: snapdir = .zfs/snapshot
    shadow: sort = desc
    shadow: format = -%Y-%m-%d-%H%M
    shadow: snapprefix = ^zfs-auto-snap_\(frequent\)\{0,1\}\(hourly\)\{0,1\}\(daily\)\{0,1\}\(weekly\)\{0,1\}\(monthly\)\{0,1\}
    shadow: delimiter = -20
    
[$SHARE]
    comment = Main Share
    path = /$ZPOOL/$SHARE
    read only = No
    create mask = 0660
    directory mask = 0770
EOF

echo "Restart samba services"
sudo systemctl enable smbd nmbd wsdd

echo "############################################"
echo "nasbeery installation finished! rebooting..."
echo "############################################"
sudo reboot